Free physiotherapy room CAD blocks for AutoCAD

Treatment side and exercise side

Plan the room as two halves plus open floor. The treatment side holds the couch where hands-on therapy happens, with access for the therapist on both sides. The exercise side holds the bench, bike and any mat or weight space for rehab. Between and around them sits the clear floor where a patient moves under supervision.

The core blocks are a treatment couch (the patient lies for therapy), an adjustable or flat bench for exercises, a gym bike for cardio rehab, optionally a recliner for rest and recovery, and scale figures to test access to the couch and clear space for standing exercises. The mix of clinical and fitness blocks is what makes this room read correctly.

Physio room dimensions and clear floor

Keep these as ranges. A physio treatment room varies widely with use, but allow enough that a couch, some exercise kit and a genuinely usable open floor coexist — a single treatment-plus-exercise room often wants more area than a plain consulting room for this reason. The treatment couch is roughly 1900–2000 mm by 600–700 mm.

Give the couch about 900 mm of access on a long side, ideally both sides, so the therapist can work from either. Around the bike and bench leave access to mount, exercise and dismount, and — most importantly — protect a clear open floor area where a patient can stand, balance and take a few supervised steps without hitting furniture. Draw the couch access, the equipment access and the open floor as zones, and the room shows whether rehab can actually happen in it.

Setting out the physio room in AutoCAD

Place the treatment couch against a wall with access to a long side toward open space, and a basin or trolley within reach for hands-on work. Set the bike and bench on the exercise side, each with its own access space, lined up so they do not eat the open floor.

Then draw and protect the open floor in the middle of the room — this is the single most important move, because it is where rehab happens and it is the first thing to get crowded out. Use scale figures to check a patient can lie on the couch, mount the bike, and stand and move on the open floor. Keep the couch, exercise kit, open floor and circulation on separate layers so you can issue a clear treatment-room plan and an equipment schedule from one DWG.

Multi-bay physio and shared rehab gyms

Larger physio departments use curtained treatment bays plus a shared rehab gym. The treatment couch becomes a repeating bay unit with privacy curtains, and the bike, bench and weights gather in a shared exercise area that several patients use at once. The blocks here let you draw both at true scale on the same plan.

Array the couch bays like ward bays, each with curtain and access, and zone the shared rehab gym with the exercise kit and a generous open floor. Use scale figures to confirm the shared floor holds several patients exercising at safe spacing. This mixed layout — bays plus gym — is typical of a hospital or large clinic physio unit, and the combined medical and fitness blocks suit it directly.

Per-item notes for physio blocks

Patient couch — the treatment anchor; give it access on both long sides where you can, with a basin or trolley within reach.

Adjustable bench / bench — for seated and lying exercises; place on the exercise side with mount-and-dismount space and keep it off the open floor.

Gym bike — for cardio and lower-limb rehab; leave access to step on and off and reach the controls.

Recliner — for rest, recovery and seated treatment; draw its access clearance like a couch's.

Human figure (plan) — place a patient on the couch, on the bike, and standing on the open floor to prove all three functions fit.

Why plan view suits the physio room

A physio room is laid out in plan — couch, exercise kit, open floor, curtain bays and circulation all read from above, which is what the room layout and the equipment schedule need. The blocks here insert at true size for that work, so the couch, bench and bike you place are the items you schedule and set out.

Where a department repeats treatment bays, a resolved bay copies cleanly, and the shared rehab gym is drawn once with its open floor protected. Combining medical couches and fitness equipment in one plan, both to scale, is exactly what a physio unit needs and what a single, mixed block set delivers.