Block landing · oval basin cad block dwg
Oval basin CAD blocks in DWG and DXF
By Sumana Kumar · Published 28 Nov 2024 · Updated 3 Jan 2026
An oval basin sits between the soft circular bowl and the practical rectangle: it gives more front-to-back washing room than a circle while keeping rounded ends that are easy to clean and gentle on a hip. That elongated shape changes how it fits a vanity and how the tap lines up, so it is worth drawing from a block built for the oval rather than stretching a circle. This page collects free oval basin CAD blocks in DWG — the oval wash basin drawn at true millimetre dimensions in plan and elevation, ready to insert into AutoCAD 2004 or later. Every file is free for personal and commercial use, with no signup, no watermark and no credit required.
Oval basins are a mainstay of hotel vanities, family bathrooms and en-suites because the shape works inset into a worktop or standing as a counter-top vessel. Drawing them from a correctly scaled block lets you check the basin leaves room for the tap, the soap and the gap to the next bowl on a double vanity the instant the oval lands on the plan.
What's in a good oval basin block
A usable oval basin block shows the rim ellipse, the tap hole or deck-tap position along the long axis behind the bowl, and the waste toward the back of the basin. The long axis usually runs front to back into the room, giving the user reach without widening the basin, and the block needs to capture that orientation so the tap and splashback line up.
The elevation should carry the bowl depth and, for a counter-top oval, the height it stands above the worktop. The blocks here draw the rim, tap and waste on sensible layers, so you can recolour the bowl for a presentation, cut the inset hole for the joiner, or strip the block to a setting-out ellipse for the plumber — all without redrawing the basin from scratch.
Inset oval vs counter-top oval
An inset oval basin drops into the vanity worktop, so in plan you cut an oval hole and in elevation the rim sits flush with or just below the counter. This is the workhorse arrangement for family bathrooms and hotel vanities, with the tap deck-mounted on the worktop behind the bowl.
A counter-top oval vessel instead stands on the worktop and adds its height above it, so the supporting counter is set lower to keep the finished rim comfortable. Knowing which you are drawing decides the counter height in elevation and where the tap sits. Many downloads here include the views for either arrangement, so you can build whichever your design calls for from one file.
Typical sizing to design around
Reach for these ranges when laying out an oval basin. Long axis (front to back, or along the counter): commonly 450–600 mm. Short axis: roughly 330–420 mm. Bowl depth: around 130–170 mm. For a counter-top oval vessel, the height above the worktop is often 100–150 mm, which is why the supporting counter is set lower. Aim for a finished rim around 800–900 mm above the floor.
These are planning envelopes, not fixed product figures — oval basins vary by manufacturer, so confirm against the specified model before dimensioning. Placing a correctly sized ellipse first lets you test the tap clearance, the soap surface and the gap between bowls on a double vanity, then refine to the chosen basin.
How to insert and place the block
These basin blocks are drawn full size in millimetres. Insert at scale 1 in a millimetre drawing, 0.001 in a metre template, or set INSUNITS to millimetres so AutoCAD rescales on insertion. Draw the vanity worktop outline first, run INSERT or drag the DWG from a tool palette, and place the oval with its long axis running into the room and the tap toward the wall.
For a double vanity, copy the basin and array the pair with even spacing so each has tap and elbow room. In elevation, snap an inset oval to the counter line, or for a vessel stand it on a lowered worktop. Because the basin is a single block reference, an edit to its definition updates every placed instance at once across the layout.
Where oval basins are used
Oval basin blocks suit family bathrooms, en-suites, hotel rooms, serviced apartments and any vanity where a softened, generous bowl is wanted without the hard corners of a rectangle. The shape sits comfortably on single and double vanities and reads well on presentation elevations, particularly as a counter-top vessel.
Pair them with the vanity, tap and mirror blocks in the bathroom category to assemble a complete basin station, and use the plan blocks to confirm the basins clear the door and leave working room. Keep the basin on a dedicated sanitaryware layer so you can isolate it for a setting-out drawing or freeze it for a structural plan, and once a basin-and-tap station is resolved, write it out as a single reusable block to array down a row of matching vanities. Because the files are free and licence-clear, they carry from a concept board through to coordinated joinery and fit-out drawings, keeping the same basin from sketch to construction set.
Free download
Browse the full library — DWG & DXF, no signup.
Questions
Frequently asked
How is an oval basin different from a circular one in a drawing?+
An oval basin is elongated along one axis, giving more front-to-back washing room than a circle while keeping rounded, easy-clean ends. Orient the long axis into the room so the tap and splashback line up, which the oval blocks are drawn to support.
Can I use an oval basin block as both inset and counter-top?+
The shape works either way, but the drawing differs: an inset oval sits flush in the worktop, while a counter-top oval stands proud and needs a lower supporting counter. Many downloads include the views for both arrangements.
What size should I draw an oval basin at?+
Oval basins are commonly 450–600 mm along the long axis and 330–420 mm across. Treat these as ranges and confirm against the specified product before dimensioning a construction drawing.
Are the oval basin blocks free for commercial use?+
Yes. Every oval basin block here downloads free in DWG with no signup, no watermark and no attribution requirement, and is cleared for commercial project use.
Related downloads
Blocks for this guide
Related categories
Related guides
Block landing
Free Bathroom Fixtures CAD Blocks — DWG Download
Download free bathroom fixtures CAD blocks in DWG and DXF — toilets, wash basins, bathtubs, showers and vanities drawn in plan and elevation. No signup, commercial OK.
Block landing
Free Sanitary Fixtures CAD Blocks — DWG Download
Download free sanitary fixtures CAD blocks in DWG and DXF — WCs, wash basins, urinals and sinks in plan and section for AutoCAD sanitary plans.
Block landing
Free Toilet / WC CAD Blocks — DWG Download
Download free toilet / WC CAD blocks in DWG and DXF — close-coupled, back-to-wall and commode pans in plan and elevation for AutoCAD. No signup, commercial OK.