Block landing · dressing table cad block
Free dressing table CAD blocks in DWG and DXF
By Saumyajit Maity · Published 1 Mar 2024 · Updated 14 Aug 2024
A dressing table is the vanity station of a bedroom — a table for grooming and makeup, paired with a mirror above and a stool tucked beneath. It's a compact piece, but it asks for a specific set of conditions: a seated user, good light, and clear knee space under the top. This page collects free dressing table CAD blocks in DWG and DXF, including dressing tables drawn with their mirror and stool as a set, at true millimetre dimensions and ready for AutoCAD 2004 or later. Every file is free for personal and commercial use, with no signup, no watermark and no attribution required.
Use these blocks to complete bedrooms, dressing rooms, hotel guest rooms and en-suite vanity corners. The block does two jobs: it places a styled vanity moment, and it proves there's room to pull the stool out and sit, which is the practical test a dressing table has to pass.
What a dressing table set includes
A dressing table block is most useful as a small set: the table, a mirror above, and a stool. The table provides the surface and usually some drawers; the mirror is the reason the table sits where it does — it wants to face good light; and the stool needs to slide fully under the top when not in use. Drawing the three together captures the relationship that makes the piece work.
The plan shows the table footprint, the stool position and the pull-out zone in front. The elevation shows the table height, the knee recess and the mirror above — the vertical composition that sells a dressing table on a presentation sheet. The blocks here keep the table, the stool and the mirror on separate layers so you can show a clean plan or a styled elevation from one download.
Dressing table sizes to design around
Use these as your reference. A dressing table top is commonly 900–1200 mm wide and 400–500 mm deep — shallow, because it sits against a wall and doesn't need full table depth. Height matches a desk at around 720–750 mm so a seated user's knees clear the underside. The stool is roughly 400–500 mm across and 450 mm high. The mirror above typically runs 500–900 mm wide.
The clearance that matters is the seat pull-out: allow about 600 mm of clear floor in front of the table so the stool can be drawn back and someone can sit comfortably. Where the dressing table tucks into a corner or beside a wardrobe, the scaled block lets you confirm that pull-out zone stays clear of the bed, the wardrobe doors and the room's circulation.
Placing a dressing table for light
A dressing table lives or dies by its light, so its placement on the plan is rarely arbitrary. The ideal spot puts the user facing or beside a window for daylight, with the mirror positioned so it doesn't throw the face into shadow. In a hotel or windowless dressing area, the block's position should align with planned vanity lighting instead.
On the drawing, snap the table's back to the wall, centre the mirror above it, and orient the whole set toward the light source. Then check the stool pull-out against the surrounding furniture. Because the set is drawn to scale, you can test several positions — by the window, beside the wardrobe, in an alcove — and pick the one that gives both good light and clear sitting space.
Inserting and placing the block
These blocks are drawn full size in millimetres. Insert at scale 1 in a millimetre drawing, 0.001 in a metre template, or set INSUNITS to millimetres so AutoCAD rescales on insertion. Run INSERT or drag the DWG in, snap the back of the table to the wall, and rotate to face the light or the room as the design wants.
Because the dressing table usually comes as a set, you can place the table, mirror and stool in one move and then fine-tune the stool position. As a single block reference it copies cleanly into repeated rooms for hotel schemes. Keep the set on the furniture layer so it freezes and thaws with the rest of the bedroom furnishings, and so you can show just the joinery when needed.
Where dressing table blocks are used
Dressing table blocks appear in bedrooms, dedicated dressing rooms, hotel and resort guest rooms, en-suite vanity corners and apartment fit-outs. In residential work they add a personal grooming station and prove the bedroom can accommodate it alongside the bed and wardrobe. In hospitality they're a standard guest-room fitting, often combined with a desk.
They're specified alongside beds, wardrobes and mirrors, so reach for the wardrobe, side table and wall mirror blocks in the furniture category when you fit out the room. The same scaled dressing-table set carries from a concept plan to a furnished and a styled elevation, so the bedroom reads consistently across the set.
Dressing table, console or desk — telling them apart
A dressing table, a console table and a desk can all look like a shallow table against a wall, but they're drawn and placed for different uses, and a good layout keeps them distinct. A dressing table is for a seated user grooming at a mirror: it needs knee clearance, a stool, a mirror above, and good light. A console is a standing-height surface with no seat, used for display or drop-zone duty in a hall or behind a sofa — it has no knee recess. A desk is for working: deeper top, room for a laptop and a task chair, often near a power and data point.
Reading the plan, you tell them apart by the company they keep: a dressing table has a stool and a mirror; a console has neither and sits taller; a desk has a task chair and a deeper top. Drawing each to its own scaled block, with the right partner pieces, makes the room's intent legible — a reviewer can see at a glance that this corner is for grooming, that one for display, and that one for work. For the standing-surface alternative, see the console table blocks; for grooming, these dressing tables are the piece.
Free download
Browse the full library — DWG & DXF, no signup.
Questions
Frequently asked
What size is a dressing table?+
A dressing table top is commonly 900–1200 mm wide and 400–500 mm deep, at desk height around 720–750 mm so a seated user's knees clear the underside. The blocks are drawn to those ranges, with the stool and mirror as a set.
How much space do I need in front of a dressing table?+
About 600 mm of clear floor so the stool can be pulled back and someone can sit comfortably. The scaled block lets you confirm that pull-out zone stays clear of the bed, wardrobe doors and circulation.
Do the dressing table blocks include a mirror and stool?+
Many do. The dressing table is most useful drawn as a set with its mirror above and stool beneath, because the relationship between them is the design. You can freeze or explode the stool or mirror layer if you only need the table.
Are the dressing table blocks free for commercial use?+
Yes. Every block downloads free in DWG (and DXF where available) with no signup, no watermark and no attribution requirement, cleared for commercial project use.
Related downloads
Blocks for this guide
Related categories
Related guides
Block landing
Free Office Chair CAD Blocks — DWG Download
Download free office chair CAD blocks in DWG and DXF — task chairs, swivel chairs and executive seats drawn in plan and elevation, AutoCAD 2004+, no signup.
Block landing
Free Bar Table CAD Blocks — DWG Download
Download free bar table CAD blocks in DWG and DXF — round, square and rectangular high bar tables in plan and elevation for AutoCAD. No signup, commercial-use OK.
Block landing
Free Restaurant Table CAD Blocks — DWG Download
Download free restaurant table CAD blocks in DWG and DXF — 2, 4 and 6 cover tables with chairs drawn in plan and elevation for AutoCAD. No signup, commercial-use OK.