Block landing · skygarden pendant cad block
Free Skygarden pendant CAD block in DWG and DXF
By Sumana Kumar · Published 8 Dec 2024 · Updated 8 Dec 2024
The Skygarden is a designer suspension pendant with a deep, plain dome on the outside and an ornate plaster-style floral relief hidden on the inside — a fitting that looks minimal from across the room and reveals its decoration only when you stand beneath it. This page offers a free Skygarden pendant CAD block in DWG and DXF, drawn in plan and elevation at true millimetre size so the dome reads correctly over a table or island. It is free for commercial use with no signup, watermark or attribution.
The Skygarden is a popular choice over kitchen islands and dining tables precisely because it pairs a clean exterior with a decorative surprise, so it suits both contemporary and classic interiors. On the drawing what matters is the dome diameter and the drop, because those set how the pendant relates to the surface below and to head height. This block gives you both the plan footprint and the elevation profile so the fitting is right on the page.
Diameter and drop to design around
Treat these as ranges and confirm against the actual variant, since the Skygarden is made in more than one size. The dome diameter commonly falls in the 400–900 mm range across the family, the larger sizes used over big islands and tables. The drop — the distance from ceiling to the bottom rim — is set by the room: over a kitchen island or dining table the rim usually sits a comfortable distance above the worktop or table so it lights the surface and shows the inner relief without being in the way.
Because the block is full size, dimension the dome diameter and set the drop straight off the elevation to suit the ceiling height and the surface below. Over a long island a row of identical Skygardens is common, in which case even spacing along the island is the thing to show.
Inserting and spacing over an island
The DWG is drawn in millimetres. Insert at scale 1 in a millimetre drawing, 0.001 in a metre drawing, or set INSUNITS to millimetres so an imperial template rescales it. Run INSERT or drag from a palette and pick the insertion point at the centre of the dome so it centres and rotates cleanly.
For a single pendant, centre the plan block over the table or island and set the drop in the elevation. For a row over a long island, ARRAY the block at an even spacing so the pendants line up — that regular rhythm is a big part of why the Skygarden is chosen for islands. Keep the fitting on its own lighting layer so the pendants can be shown or hidden independently of the joinery.
Where the Skygarden pendant is used
The Skygarden is a favourite over kitchen islands and dining tables, and it also suits hallways, reception desks, hotel and restaurant interiors, and bedside or feature positions in residential schemes. Its plain-outside, decorative-inside character lets it work in both modern and more traditional rooms, which is why it appears so often on interior presentation boards.
Drawn in plan and elevation it lets you show a single feature pendant or a coordinated row, and it drops into sections through open-plan kitchens and dining spaces to show the lighting in context. Free and licence-clear, the block suits student and competition work as well as a coordinated interiors package, and crosslinks with the Taraxacum, Frisbi and other designer pendants in the lighting category.
Coordinating the pendant on the drawing
Like any suspended feature fitting, the Skygarden needs to clear head height, sit clear of other ceiling services and align with the surface below — so keep it on its own lighting layer with a distinct colour and use the full-size block to check the drop and the clearances on the section before the ceiling is set out.
For a row over an island, getting the spacing even and centred on the island is what makes the scheme read as designed, and arraying the block keeps the centres true. Edit the block definition once and every copy updates, so a change of size or drop flows through the whole row from a single edit rather than being redrawn at each pendant.
Lining a row up over an island
Where a single Skygarden is a feature, a row of them over a long island is a composition, and the drawing is what makes that composition land. The pendants have to be evenly spaced, centred on the island both along its length and across its width, and hung at a consistent drop so the row reads as a deliberate rhythm rather than a scatter. Placing each one as a full-size block and arraying at a fixed spacing is how you guarantee that regularity.
The spacing also has to relate to the island's working zones — a pendant ideally falls over the prep area or the seating end rather than over a void, so the row is coordinated with the joinery plan, not just spread for looks. Setting out the pendants to scale lets you confirm the end pendants sit a sensible distance in from the island ends rather than hanging off the edge. It is this set-out — even, centred, related to the worktop below — that separates a considered island lighting scheme from a row of pendants that merely happens to be there.
Free download
Browse the full library — DWG & DXF, no signup.
Questions
Frequently asked
What is a Skygarden pendant?+
A designer suspension pendant with a deep plain dome outside and an ornate plaster-style floral relief on the inside, revealed only when you stand beneath it. It is popular over kitchen islands and dining tables.
Does the block include plan and elevation?+
Yes. It ships both the plan footprint and the elevation of the dome, so you can centre it on an island in plan and set its diameter and drop in elevation or section.
What size is a Skygarden and how low should it hang?+
Dome diameter commonly falls in the 400–900 mm range across the family. The drop is set by the room; over an island or table the rim usually sits a comfortable distance above the surface. The block is full size, so set both off the elevation.
Will it open in older AutoCAD and free viewers?+
Yes. It targets AutoCAD 2004 and later and opens in AutoCAD, AutoCAD LT, BricsCAD, DraftSight and free DWG viewers such as Autodesk's online viewer.
Related downloads
Blocks for this guide
Related categories
Related guides
Block landing
Free Lighting Fixtures CAD Blocks — DWG Download
Download free lighting fixtures CAD blocks in DWG and DXF — chandeliers, wall lights, downlights and pendants in plan and elevation for AutoCAD.
Block landing
Free Table Lamp CAD Blocks — DWG Download
Download free table lamp CAD blocks in DWG and DXF — classical and decorative table lamps in plan and elevation for AutoCAD 2004+. No signup, commercial-use OK.
Block landing
Free Floor Lamp CAD Blocks — DWG Download
Download free floor lamp CAD blocks in DWG and DXF — straight and arc floor lamps in plan and elevation for AutoCAD 2004+. No signup, free for commercial use.